nav emailalert searchbtn searchbox tablepage yinyongbenwen piczone journalimg journalInfo journalinfonormal searchdiv searchzone qikanlogo popupnotification paper paperNew
2026, 01, v.45 10-17
从含钛高炉渣中湿法提取钛研究进展
基金项目(Foundation): 河北省教育厅科学研究项目资助(ZC2023059)
邮箱(Email):
DOI: 10.13355/j.cnki.sfyj.2026.01.002
摘要:

含钛高炉渣的处理和资源化利用是钢铁工业环境保护的研究焦点和难点。综述了从含钛高炉渣中湿法提取钛的研究进展,分析了硫酸浸出法、盐酸浸出法、有机酸浸出法、硫酸铵熔融法、氯化铵焙烧法、碱熔融法处理含钛高炉渣的原理、工艺特点、处理效果、存在问题、工业化前景,以及对环境产生的影响,并对含钛高炉渣湿法提取钛的技术要求和发展方向进行了展望。

Abstract:

The treatment and resource utilization of titanium-bearing blast furnace slag are the focus and difficult point of research on environmental protection for the iron and steel industry.The research progress on extraction of titanium from titanium-bearing blast furnace slag is reviewed, and the principle, process characteristics, treatment effects, existing problems, industrial prospects and environmental impact of sulfuric acid leaching, hydrochloric acid leaching, organic acid leaching, ammonium sulfate melting, ammonium chloride roasting, alkali melting methods for treatment of titanium-bearing blast furnace slag are analyzed.The technical requirements and development trends of extraction of titanium from titanium-bearing blast furnace slag by hydrometallurgy are prospected.

参考文献

[1] CAI Y F,SONG N N,YANG Y F,et al.Recent progress of efficient utilization of titanium-bearing blast furnace slag[J].International Journal of Minerals,Metallurgy and Materials,2022,29(1):22-31.

[2] LEI Y,SUN L E,MA W H,et al.An approach to employ titanium-bearing blast-furnace slag to prepare Ti and Al-Si alloys[J].Journal of Alloys and Compounds,2018,769(8):983-990.

[3] SHI J J,QIU Y C,YU B,et al.Titanium extraction from titania-bearing blast furnace slag:a review[J].JOM,2022,74(2):654-667.

[4] FAN G Q,WANG M,DANG J,et al.A novel recycling approach for efficient extraction of titanium from high-titanium-bearing blast furnace slag[J].Waste Management,2020,120.DOI:10.1016/j.wasman.2020.10.024.

[5] WANG Y,GAO X,HE S Q,et al.Kinetics of extracting valuable components from Ti-bearing blast furnace slag by acidolysis with sulphuric acid [J].Frontiers in Chemistry,2024,12(1):1-10.

[6] WANG L,CHEN L,LIU W Z,et al.Recovery of titanium,aluminum,magnesium and separating silicon from titanium-bearing blast furnace slag by sulfuric acid curing-leaching[J].International Journal of Minerals,Metallurgy and Materials,2022,29(9):1705-1714.

[7] ZHOU L S,PENG T J,SUN H J,et al.Thermodynamics analysis and experiments on Ti-bearing blast furnace slag leaching enhanced by sulfuric acid roasting[J].RSC Advances,2022,12(54):34990-35001.

[8] YANG Z Y,YANG F,YI M G,et al.Estimation of reaction heat in Ti-bearing blast furnace slag—sulfuric acid system based on mechanical mixture model[J].Mining,Metallurgy & Exploration,2021,38(2):1247-1252.

[9] 唐玉梅,何思祺,黄晨,等.高钛高炉渣酸浸液沸腾水解制备偏钛酸的过程动力学研究[J].化工矿物与加工,2022,51(1):1-5.TANG Yumei,HE Siqi,HUANG Chen,et al.Study on the process kinetics for producing metatitanic acid by boiling hydrolysis of acid leaching liquor from high-titanium blast furnace slag[J].Industrial Minerals & Processing,2022,51(1):1-5.

[10] 黄晨,何思祺,唐玉梅,等.高钛高炉渣硫酸酸浸液沸腾水解制备二氧化钛的研究[J].钢铁钒钛,2021,42(3):44-52.HUANG Chen,HE Siqi,TANG Yumei,et al.Preparation of titanium dioxide from acid leaching solution of high titanium blast furnace slag by boiling hydrolysis[J].Iron Steel Vanadium Titanium,2021,42(3):44-52.

[11] YANG F,PENG Q G,WANG J,et al.Co-removal of Fe/V impurity in H2TiO3 synthesized from Ti-bearing blast furnace slag[J].Nanomaterials,2024,14(12).DOI:10.3390/nano14010012.

[12] 马光强,邹敏.用盐酸浸出含钛高炉渣富集钛的试验研究[J].湿法冶金,2015,34(1):46-49.MA Guangqiang,ZHOU Min.Beneficiation of titanium by leaching of blast furnace slag using hydrochloric acid[J].Hydrometallurgy of China,2015,34(1):46-49.

[13] 皇甫林,姜洋,邱正秋,等.高钛型高炉渣中Ca、Mg、Al元素浸出特性研究[J].钢铁钒钛,2023,44(4):18-24.HUANGFU Lin,JIANG Yang,QIU Zhengqiu,et al.Research on the leaching characteristics of Ca,Mg,Al elements in high titanium blast furnace slag[J].Iron Steel Vanadium Titanium,2023,44(4):18-24.

[14] 张鹏,刘代俊,毛雪华,等.水淬含钛高炉渣的盐酸浸取研究[J].钢铁钒钛,2012,33(5):6-9.ZHANG Peng,LIU Daijun,MAO Xuehua,et al.Leaching of water quenched titanium-bearing blast furnace slag in hydrochloric acid[J].Iron Steel Vanadium Titanium,2012,33(5):6-9.

[15] 黄先良,钟山,唐思扬,等.盐酸法浸出水淬含钛高炉渣制备高纯金红石型二氧化钛[J].钢铁钒钛,2023,44(3):23-32.HUANG Xianliang,ZHONG Shan,TANG Siyang,et al.Production of high-purity rutile titanium dioxide by leaching water-quenched titanium-bearing blast furnace slag with hydrochloric acid[J].Iron Steel Vanadium Titanium,2023,44(3):23-32.

[16] LIU Y,CHEN X G,MAO S D,et al.Extraction of valuable metals from titanium-bearing blast furnace slag by acid leaching[J].Journal of Wuhan University of Technology (Materials Science),2024,39(2):376-385.

[17] ZHU S,HU J G,ZHANG C H,et al.Process optimization and kinetics of titanium leaching from mechanically activated titanium-bearing blast furnace slag[J].Journal of Sustainable Metallurgy,2023,9(1):230-239.

[18] 马光强,程敏,邹敏.硼酸熔融处理含钛高炉渣制备富钛料的方法:201410154879.5[P].2014-04-17.

[19] 闫柏军,董自慧.一种利用含钛高炉渣制备二氧化钛的方法:202010105920.5[P].2020-06-26.

[20] 王攀,罗启贵,杨波,等.从含钛高炉渣中提取二氧化钛制作钛白粉的方法:202010445780.6[P].2020-08-25.

[21] 罗培强,王攀,罗红莹.含钛高炉渣湿法提钛工艺[J].环境生态学,2022,4(4):115-118.LUO Peiqiang,WANG Pan,LUO Hongying.Wet extraction of titanium from titanium-bearing blast furnace slag[J].Environmental Ecology,2022,4(4):115-118.

[22] ZHANG Y,XUE X X,YANG H.Synthesis of foliar fertilizer and Ca-S-Si compound fertilizer from titanium-bearing blast furnace slag[J].Journal of Environmental Science and Engineering,2010,4(2):30-36.

[23] ZHANG Y.Recovery of titanium from titanium bearing blast furnace slag by sulphate melting[J].Canadian Metallurgical Quarterly,2014,53(4):440-443.

[24] BIAN Z Z,FENG Y L,LI H R.Extraction of valuable metals from Ti-bearing blast furnace slag using ammonium sulfate pressurized pyrolysis-acid leaching processes[J].Transactions of Nonferrous Metals Society of China,2020,30(10):2836-2847.

[25] 张悦,王思佳,薛向欣.氨水沉淀法由含钛滤液提取二氧化钛[J].化工学报,2012,63(10):3345-3349.ZHANG Yue,WANG Sijia,XUE Xiangxin.Recovery of titanium dioxide from titanium-bearing solution by using ammonium as precipitant[J].CIESC Journal,2012,63(10):3345-3349.

[26] XIONG Y J,ALDAHRI T,LIU W Z,et al.Simultaneous preparation of TiO2 and ammonium alum,and microporous SiO2 during the mineral carbonation of titanium-bearing blast furnace slag[J].Chinese Journal of Chemical Engineering,2020,28(9):2256-2266.

[27] JU J R,FENG Y L,LI H R,et al.An approach towards utilization of water-quenched blast furnace slag for recovery of titanium,magnesium,and aluminum[J].Journal of Environmental Chemical Engineering,2022,10(4).DOI:10.1016/j.jece.2022.108153.

[28] JU J R,FENG Y L,LI H R,et al.A sustainable method for Ti,Al and Mg recovery from titanium-bearing blast furnace slag coupled with CO2 sequestration by leaching residue[J].JOM,2023,75(2):358-369.

[29] 谢思源,蒋伟,汪胜东,等.含钛高炉渣氯化铵焙烧活化试验[J].有色金属(冶炼部分),2024,71(5):68-75.XIE Siyuan,JIANG Wei,WANG Shengdong,et al.Activation test of titanium-bearing blast furnace slag by roasting with ammonium chloride[J].Nonferrous Metals(Extractive Metallurgy),2024,71(5):68-75.

[30] 谢思源,蒋训雄,蒋伟,等.含钛高炉渣氯化铵活化焙烧工艺优化研究[J].有色金属工程,2024,14(6):68-75.XIE Siyuan,JIANG Xunxiong,JIANG Wei,et al.Optimisation of ammonium chloride activated roasting process for titanium-bearing blast furnace slag[J].Nonferrous Metals Engineering,2024,14(6):68-75.

[31] HE S Q,PENG T J,SUN H J.Titanium recovery from Ti-bearing blast furnace slag by alkali calcination and acidolysis[J].JOM,2019,71(9):3196-3201.

[32] 何思祺,孙红娟,彭同江,等.碱法处理含钛高炉渣的矿相变化及工艺条件探索[J].钢铁钒钛,2015,36(6):44-50.HE Siqi,SUN Hongjuan,PENG Tongjiang,et al.Technological conditions and mineralogical changes of alkaline treatment on Ti-bearing blast furnace slag[J].Iron Steel Vanadium Titanium,2015,36(6):44-50.

[33] LI X,YU H H,FANG Z H,et al.Processing of TiO2 from titanium-bearing blast furnace slag as titanium source[J].Metalurgija,2016,55(3):379-381.

基本信息:

DOI:10.13355/j.cnki.sfyj.2026.01.002

中图分类号:X757;TF823

引用信息:

[1]张悦,李艾彤,刘佳欣,等.从含钛高炉渣中湿法提取钛研究进展[J].湿法冶金,2026,45(01):10-17.DOI:10.13355/j.cnki.sfyj.2026.01.002.

基金信息:

河北省教育厅科学研究项目资助(ZC2023059)

投稿时间:

2025-01-03

投稿日期(年):

2025

终审时间:

2025-01-06

终审日期(年):

2025

审稿周期(年):

1

发布时间:

2025-08-28

出版时间:

2025-08-28

网络发布时间:

2025-08-28

检 索 高级检索

引用

GB/T 7714-2015 格式引文
MLA格式引文
APA格式引文