| 393 | 7 | 7 |
| 下载次数 | 被引频次 | 阅读次数 |
研究了高纯氧化铝制备过程中铝酸钠溶液杂质硅、铁的脱除,考察了CaO加入量、反应温度、反应时间对硅、铁脱除率及溶液中铝质量浓度的影响。结果表明:加入氧化钙可较完全脱除铝酸钠溶液中的杂质硅和铁;适宜的CaO加入量为8g/L,反应温度为80~85℃,反应时间为2h;适宜条件下,铝酸钠溶液中杂质硅、铁脱除率分别达98.52%和98.44%,且溶液中铝的损失得到有效控制。
Abstract：Removing of Si and Fe from sodium aluminate solution for preparing high purity alumina was studied.The effects of CaO amount,reaction temperature and reaction time on removal of Si,Fe and the Al concentration were examined.The results show that Si and Fe can be removed quite completely by adding CaO.The optimum conditions is CaO amount of 8g/L,reaction temperature of 80-85 ℃and reaction time of 2h.The removal rate of Si and Fe in the sodium aluminate solution are 98.52%and 98.44%,respectively.And the loss of aluminum can be controlled effectively at the best conditions.
[1]杨重愚.氧化铝生产工艺学[M].北京:冶金工业出版社,1993.
[2]张英,刘卫.高纯氧化铝纯化工艺的研究进展[J].广州化工,2014,42(14):20-21.
[3]袁杰,于站良,陈家辉,等.高纯氧化铝粉制备研究进展[J].材料导报:A:综述篇,2014,28(1):75-78.
[4]陈家辉,和晓才,袁杰,等.高纯氧化铝制备方法研究进展[J].云南冶金,2013,42(5):44-47.
[5]刘丽,李荣兴,谢刚,等.铝酸钠溶液碳酸化分解制备氢氧化铝微粉[J].轻金属,2014(7):19-23.
[6]马家玉,周建伟,姜跃华,等.铝酸钠溶液添加Mg-Al水滑石脱硅的研究[J].轻金属,2013(7):13-17.
[7]刘桂华,齐天贵,田侣,等.氧化镁在铝酸钠溶液脱硅中的反应行为[J].中国有色金属学报,2013,23(7):2055-2060.
[8]刘瑛瑛,张丽云.铝酸钠溶液深度脱硅[J].轻金属,2011(10):17-19.
[9]李宏亮.铝酸钠溶液脱硅过程的研究[J].新疆有色金属,2012(增刊):113-115.
[10]Whittington B I.The Chemistry of CaO and Ca(OH)2Relating to the Bayer Process[J].Hydrometallurgy,1996,43(1/2/3):13-35.
[11]高君丽.铝酸钠溶液中铁的行为及其抑制[D].长沙:中南大学,2007.
[12]牛飞.含硫铝酸钠溶液中铁浓度的变化规律及除铁探索[D].长沙:中南大学,2012.
[13]和晓才,谢刚,李怀仁,等.超声波对盐酸脱除氧化铝中铁、硅的影响[J].湿法冶金,2015,34(2):142-145.
[14]王雅静,王立思,张志刚,等.中高浓度铝酸钠溶液一段脱硅的动力学研究[J].矿产综合利用,2014(2):74-76.
[15]Ma J Y,Zhai K M,Li Z B,et al.Desilication of Synthetic Bayer Liquor With Calcium Sulfate Dehydrate:Kinetics and Modeling[J].Hydrometrallurgy,2011,107(1/2):48-55.
基本信息:
DOI：10.13355/j.cnki.sfyj.2015.06.017
中图分类号:TF821
引用信息:
[1]赖浚,崔涛,和晓才等.高纯氧化铝制备过程中铝酸钠溶液脱硅铁工艺研究[J].湿法冶金,2015,34(06):508-511.DOI:10.13355/j.cnki.sfyj.2015.06.017.
基金信息: